Warning: strtotime() [function.strtotime]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/Los_Angeles' for 'PDT/-7.0/DST' instead in /home/edifast0/public_html/corp/libraries/joomla/utilities/date.php on line 56

Warning: date() [function.date]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/Los_Angeles' for 'PDT/-7.0/DST' instead in /home/edifast0/public_html/corp/libraries/joomla/utilities/date.php on line 198

Configurando Teclado e Mouse Bluetooth (Mouse e Keyboard) no Ubuntu Lucid

E-mail Imprimir PDF

Veja estes links:

https://help.ubuntu.com/community/BluetoothSetup

http://www.ubuntugeek.com/howto-setup-bluetooth-keyboard-and-mouse-in-ubuntu.html

http://awesomelinux.blogspot.com/2010/05/ubuntu-1004-lucid-logitech-dinovo-edge.html

http://www.electric-spoon.com/cgi-bin/man/man2html?bluetoothd+8

http://blog.projectnibble.org/2010/01/28/how-to-connect-a-bluetooth-keyboard-in-ubuntu-9-04-jaunty-and-9-10-karmic-workaround/

Para versões antigas do bluez-utils meu arquivo de configuração seria:

sudo gedit /etc/bluetooth/hcid.conf

# HCI daemon configuration file.
# HCId options
options {
# Automatically initialize new devices
autoinit yes;
# Security Manager mode
#   none - Security manager disabled
#   auto - Use local PIN for incoming connections
#   user - Always ask user for a PIN
#
security user;
# Pairing mode
#   none  - Pairing disabled
#   multi - Allow pairing with already paired devices
#   once  - Pair once and deny successive attempts
pairing multi;
# Default PIN code for incoming connections
#passkey "0000";
# D-Bus PIN helper
#dbus_pin_helper;
}
# Default settings for HCI devices
device {
# Local device name
#   %d - device id
#   %h - host name       
#   name "inspiron (%d)";
name "%h";
# Local device class
#class 0x000100;
#class 0xff0100;
class 0x5a010c;
# Default packet type
pkt_type DH1,DM1,HV1;
# Inquiry and Page scan
iscan enable; pscan enable;
# Default link mode
#   none   - no specific policy
#   accept - always accept incoming connections
#   master - become master on incoming connections,
#            deny role switch on outgoing connections
lm master;
# Default link policy
#   none    - no specific policy
#   rswitch - allow role switch
#   hold    - allow hold mode
#   sniff   - allow sniff mode
#   park    - allow park mode
lp rswitch,hold,sniff,park;
}

device 00:22:48:84:4A:E4 {
name “Microsoft Bluetooth Mobile Keyboard 6000”;
auth enable;
encrypt enable;
}
device 00:22:48:84:3B:72 {
name “Microsoft Bluetooth Number Pad”;sudo gedit /etc/bluetooth/hcid.conf

auth enable;
encrypt enable;
}
device 00:22:48:E1:C1:3C {
name “Microsoft Bluetooth Notebook Mouse 5000”;
}
device 00:60:D1:00:8F:46 {
name “Bluetooth Mini Mouse”;
}

Manual deste arquivo de configuração em:

http://manpages.ubuntu.com/manpages/hardy/en/man5/hcid.conf.5.html


Hoje este arquivo de configuração não é mais utilizado pelo ubuntu lucid. Precisaria instalar o bluez-compat para fazer isso funcionar.

O man de bluetoothd informa que o local de configuração é:

/etc/bluetooth/main.conf

[General]

# List of plugins that should not be loaded on bluetoothd startup
#DisablePlugins = network,input

# Default adaper name
# %h - substituted for hostname
# %d - substituted for adapter id
Name = %h-%d

# Default device class. Only the major and minor device class bits are
# considered.
Class = 0x000100

# How long to stay in discoverable mode before going back to non-discoverable
# The value is in seconds. Default is 180, i.e. 3 minutes.
# 0 = disable timer, i.e. stay discoverable forever
DiscoverableTimeout = 0

# How long to stay in pairable mode before going back to non-discoverable
# The value is in seconds. Default is 0.
# 0 = disable timer, i.e. stay pairable forever
PairableTimeout = 0

# Use some other page timeout than the controller default one
# which is 16384 (10 seconds).
PageTimeout = 8192

# Discover scheduler interval used in Adapter.DiscoverDevices
# The value is in seconds. Defaults is 0 to use controller scheduler.
DiscoverSchedulerInterval = 0

# What value should be assumed for the adapter Powered property when
# SetProperty(Powered, ...) hasn't been called yet. Defaults to true
InitiallyPowered = true

# Remember the previously stored Powered state when initializing adapters
RememberPowered = true

# Use vendor, product and version information for DID profile support.
# The values are separated by ":" and VID, PID and version.
#DeviceID = 1234:5678:abcd

# Do reverse service discovery for previously unknown devices that connect to
# us. This option is really only needed for qualification since the BITE tester
# doesn't like us doing reverse SDP for some test cases (though there could in
# theory be other useful purposes for this too). Defaults to true.
ReverseServiceDiscovery = true

# Enable name resolving after inquiry. Set it to 'false' if you don't need
# remote devices name and want shorter discovery cycle. Defaults to 'true'.
NameResolving = true

 


 

E tem configurações interessantes no diretório:

/var/lib/bluetooth/nn:nn:nn:nn:nn:nn

onde - The directory nn:nn:nn:nn:nn:nn is the address of the local device.

Comando para verificar dispositivos disponíveis:

hcitool scan

Comando para ver suas configurações:

hciconfig -a

hci0:    Type: USB
BD Address: 00:15:AF:F9:5D:3A ACL MTU: 1021:8 SCO MTU: 64:1
UP RUNNING PSCAN ISCAN
RX bytes:1052516 acl:69099 sco:0 events:1156 errors:0
TX bytes:8337 acl:211 sco:0 commands:192 errors:1
Features: 0xff 0xff 0x8f 0xfe 0x9b 0xff 0x79 0x83
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy: RSWITCH HOLD SNIFF PARK
Link mode: SLAVE ACCEPT
Name: 'ant'
Class: 0x5a010c
Service Classes: Networking, Capturing, Object Transfer, Telephony
Device Class: Computer, Laptop
HCI Ver: 2.1 (0x4) HCI Rev: 0x50f1 LMP Ver: 2.1 (0x4) LMP Subver: 0x420e
Manufacturer: Broadcom Corporation (15)

Comando abaixo configura propriedades do bluetooth:

bluetooth-properties

Tem muito pouca documentação sobrfe o Bluez.

No link abaixo (de arquivos da WEB) temos um pouco de documentação disponível:

http://web.archive.org/web/20080501043142/wiki.bluez.org/wiki

 


 

Melhor link:

http://www.linuxquestions.org/questions/debian-26/bluetooth-problems-715839/

Lá pede para alterar o arquivo

sudo gedit /etc/rc.local

Com o conteúdo abaixo:

## Configurando Bluetooth
hciconfig hci0 reset
hciconfig hci0 class 0xff0100
hciconfig hci0 name master
## Fim da configuração do Bluetooth
exit 0

 


 

Veja artigo na íntegra:

...:::!!! SOLVED !!!:::...

This was a real pain, so this is what I did to get it to work...

In /etc/bluetooth you need to create or edit the following files: hcid.conf input.conf main.conf

# cat /etc/bluetooth/hcid.conf
#HCId Options
options {
autoinit yes;
security auto;
pairing multi;
passkey "1234";
}

#HCI Device Settings
device {
name "%h-%d";
#encrypt enable;
class 0x082580;
iscan enable; pscan enable;
discovto 0;
lm accept,master;
lp rswitch,hold,sniff,park;
pkt_type DM1,DM3,DM5,DH1,DH3,DH5,HV1,HV2,HV3;
}

#device 00:01:90:E2:49:BD {
#name "Sony Corporation Remote Controller";
#}

This section below is pretty important to get the device address use hidd --scan and press the discoverable button on the bottom of your mouse.
device 00:02:76:07:68:1C {
name "Sony Corporation (3) Button Mouse";

# cat /etc/bluetooth/main.conf
[General]

# List of plugins

that should not be loaded on bluetoothd startup
#DisablePlugins = network,input

# Default adaper name
# %h - substituted for hostname
# %d - substituted for adapter id
Name = %h-%d

# Default device class. Only the major and minor device class bits are
# considered.
Class = 0x082580

# How long to stay in discoverable mode before going back to non-discoverable
# The value is in seconds. Default is 180, i.e. 3 minutes.
# 0 = disable timer, i.e. stay discoverable forever
DiscoverableTimeout = 0

# How long to stay in pairable mode before going back to non-discoverable
# The value is in seconds. Default is 0.
# 0 = disable timer, i.e. stay pairable forever
PairableTimeout = 0

# Use some other page timeout than the controller default one
# which is 16384 (10 seconds).
PageTimeout = 8192

# Discover scheduler interval used in Adapter.DiscoverDevices
# The value is in seconds. Defaults is 0 to use controller scheduler.
DiscoverSchedulerInterval = 0

# What value should be assumed for the adapter Powered property when
# SetProperty(Powered, ...) hasn't been called yet. Defaults to true
InitiallyPowered = true

# Remember the previously stored Powered state when initializing adapters
RememberPowered = true

# Use vendor, product and version information for DID profile support.
# The values are separated by ":" and VID, PID and version.
#DeviceID = 0005:0001:0129
#DeviceID = 0000:0000:0000

# Do reverse service discovery for previously unknown devices that connect to
# us. This option is really only needed for qualification since the BITE tester
# doesn't like us doing reverse SDP for some test cases (though there could in
# theory be other useful purposes for this too). Defaults to true.
ReverseServiceDiscovery = true

# cat /etc/bluetooth/input.conf
# Configuration file for the input service

# This section contains options which are not specfic to any
# particular interface
[General]

# Set idle timeout (in minutes) before the connection will
# be disconnect (defaults to 0 for no timeout)
IdleTimeout=0

In /etc/default you need to edit the following file: bluetooth

# cat /etc/default/bluetooth
# Defaults for bluez-utils

# This file supersedes /etc/default/bluez-pan. If
# that exists on your system you should use this
# file instead and remove the old one. Until you
# do so, the contents of this file will be ignored.

# start bluetooth on boot?
# compatibility note: If this variable is not found bluetooth will
# start
BLUETOOTH_ENABLED=1

# This setting will switch HID devices (e.g mouse/keyboad) to HCI mode, that is
# you will have bluetooth functionality from your dongle instead of only HID.
# Note that not every bluetooth dongle is capable of switching back to HID
# mode, see http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=355497
HID2HCI_ENABLED=1
HID2HCI_UNDO=1

############ HIDD
#
# HID daemon
HIDD_ENABLED=1
HIDD_OPTIONS="--connect 00:02:76:07:68:1C --server"
#HIDD_OPTIONS="--master --connect 00:02:76:07:68:1C --server" <<-- I had some problems with --master and this mouse...
# to make hidd always use a particular interface, use something
# like this, substituting the bdaddr of the interface:
# HIDD_OPTIONS="-i AA:BB:CC:DD:EE:FF --server"
#
# remove '--master' if you're having trouble working with Ericsson
# T630 phones with hidd operational at the same time.

############ DUND
#
# Run dund -- this allows ppp logins. 1 for enabled, 0 for disabled.
DUND_ENABLED=0

# Arguments to dund: defaults to acting as a server
DUND_OPTIONS="--listen --persist"

# Run dund --help to see the full array of options.
# Here are some examples:
#
# Connect to any nearby host offering access
# DUND_OPTIONS="--search"
#
# Connect to host 00:11:22:33:44:55
# DUND_OPTIONS="--connect 00:11:22:33:44:55"
#
# Listen on channel 3
# DUND_OPTIONS="--listen --channel 3"

# Special consideration is needed for certain devices. Microsoft
# users see the --msdun option. Ericsson P800 users will need to
# listen on channel 3 and also run 'sdptool add --channel=3 SP'

############ PAND
#
# Run pand -- ethernet: creates new network interfaces bnep
# that can be configured in /etc/network/interfaces
# set to 1 for enabled, 0 for disabled
PAND_ENABLED=0

# Arguments to pand
# Read the PAN howto for ways to set this up
# http://bluez.sourceforge.net/contrib/HOWTO-PAN
# in later versions of pand it used to execute /etc/bluetooth/pan/dev-up
# automatically, now you will need to use the --devup/--devdown options. See
# the pand manpage for more informations
PAND_OPTIONS=""

# example pand lines
#
# Act as the controller of an ad-hoc network
# PAND_OPTIONS="--listen --role GN"
#
# Act as a network access point: routes to other networks
# PAND_OPTIONS="--listen --role NAP"
#
# Act as a client of an ad-hoc controller with number 00:11:22:33:44:55
# PAND_OPTIONS="--role PANU --connect 00:11:22:33:44:55"
#
# Connect to any nearby network controller (access point or ad-hoc)
# PAND_OPTIONS="--role PANU --search"

############ SDPTOOL
# this variable controls the options passed to sdptool on boot, useful if you
# need to setup sdpd on boot.
# options are ;-separated, i.e. for every ; an sdptool instance will be
# launched
#
# examples:
# SDPTOOL_OPTIONS="add --channel=3 SP" # ericsson P800 serial profile
# SDPTOOL_OPTIONS="add --channel=8 OPUSH ; add --channel=9 FTRN" # motorola
# # object push and file transfer
SDPTOOL_OPTIONS=""

Final Edit /etc/rc.local

# cat /etc/rc.local
#!/bin/sh -e
#
# rc.local
#
# This script is executed at the end of each multiuser runlevel.
# Make sure that the script will "exit 0" on success or any other
# value on error.
#
# In order to enable or disable this script just change the execution
# bits.
#
# By default this script does nothing.

hciconfig hci0 reset
hciconfig hci0 class 0x082580 <<-- This (as shown below) will set Service Classes: Capturing and Device Class: Peripheral, Pointing device in your hci device.
exit 0

On reboot/boot/whatever...
# hciconfig -a
hci0: Type: USB
BD Address: 00:1B:FB:8A:79:88 ACL MTU: 1021:6 SCO MTU: 64:1
UP RUNNING PSCAN ISCAN
RX bytes:279252 acl:18271 sco:0 events:480 errors:0
TX bytes:1385 acl:9 sco:0 commands:55 errors:0
Features: 0xff 0xff 0x8f 0xfe 0x9b 0xff 0x79 0x83
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy: RSWITCH HOLD SNIFF PARK
Link mode: ACCEPT MASTER
Name: 'XXXXX-000010011'
Class: 0x082580
Service Classes: Capturing
Device Class: Peripheral, Pointing device
HCI Ver: 2.1 (0x4) HCI Rev: 0x38 LMP Ver: 2.1 (0x4) LMP Subver: 0x213d
Manufacturer: Broadcom Corporation (15)

and hidd --show should reveal
# hidd --show
00:02:76:07:68:1C Sony Corporation (3) Button Mouse [0a5c:0001] connected

But the damn mouse didn't move!!! It was connected though!!!
Ahh lets look at /proc/bus/input/devices

# cat /proc/bus/input/devices
(list shortened...)

I: Bus=0005 Vendor=0a5c Product=0001 Version=0129
N: Name="Sony Corporation (3) Button Mouse"
P: Phys=00:1B:FB:8A:79:88
S: Sysfs=/class/input/input15
U: Uniq=00:02:76:07:68:1C
H: Handlers=mouse4 event13
B: EV=1f
B: KEY=70000 0 0 0 0 0 0 0 0
B: REL=103
B: ABS=100 0
B: MSC=10

It's being handled by event13...
A quick look at /dev/input/event13 revealed

# cat /dev/input/event13
IF GARBAGE PRINTS WHEN MOVING THE MOUSE IT'S CONNECTED PROPERLY

So why is X (Gnome or KDE) having a fricking problem...
xorg.conf

# cat /etc/X11/xorg.conf
Section "InputDevice"
Identifier "Sony Vaio Keys"
Driver "evdev"
Option "Device" "/dev/input/by-id/acpi-sony_laptop-event-kbd"
Option "Name" "Sony Vaio Keys"
Option "XkbLayout" "evdev"
Option "XkbModel" "evdev"
EndSection

Section "InputDevice"
Identifier "VGP-BMS33"
Driver "evdev"
Option "Protocol" "ExplorerPS/2"
Option "Device" "/dev/input/event13"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
Option "Emulate3Buttons" "true"
EndSection


#Section "InputDevice"
# Identifier "VGP-BRMP10"
# Driver "evdev"
# Option "Protocol" "ExplorerPS/2"
# Option "Device" "/dev/input/mouse5"
# Option "UpDownScrolling" "1"
# Option "Buttons" "5"
# Option "Emulate3Buttons" "false"
#EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc104
Option "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier "Alps Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/input/event11"
Option "Protocol" "event"
Option "LeftEdge" "120"
Option "RightEdge" "830"
Option "TopEdge" "120"
Option "BottomEdge" "650"
Option "FingerLow" "14"
Option "FingerHigh" "15"
Option "MaxTapTime" "180"
Option "MaxTapMove" "110"
Option "ClickTime" "0"
Option "EmulateMidButtonTime" "75"
Option "VertScrollDelta" "10"
Option "HorizScrollDelta" "0"
Option "MinSpeed" "0.45"
Option "MaxSpeed" "0.75"
Option "AccelFactor" "0.020"
Option "EdgeMotionMinSpeed" "200"
Option "EdgeMotionMaxSpeed" "200"
Option "UpDownScrolling" "1"
Option "CircularScrolling" "0"
Option "CircScrollDelta" "0.1"
Option "CircScrollTrigger" "2"
Option "SHMConfig" "true"
EndSection

Section "ServerLayout"
Identifier "Default Layout"
screen 0 "Default Screen" 0 0
InputDevice "Generic Keyboard"
InputDevice "Alps Touchpad"
InputDevice "VGP-BMS33" "SendCoreEvents"
# InputDevice "VGP-BRMP10"
EndSection

Section "Device"
Identifier "Configured Video Device"
EndSection

Section "Monitor"
Identifier "Configured Monitor"
EndSection

Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
EndSection

It now works every time, I am still working on the remote...

Here is my hardware:
# hcitool info 00:02:76:07:68:1C
Requesting information ...
BD Address: 00:02:76:07:68:1C
Device Name: VGP-BMS33
LMP Version: 1.2 (0x2) LMP Subversion: 0x229
Manufacturer: Broadcom Corporation (15)
Features: 0xbc 0x02 0x04 0x38 0x08 0x00 0x00 0x00

# hcitool info 00:01:90:E2:49:BD
Requesting information ...
BD Address: 00:01:90:E2:49:BD
Device Name: VGP-BRMP10
LMP Version: 2.0 (0x3) LMP Subversion: 0x10b7
Manufacturer: Cambridge Silicon Radio (10)
Features: 0xfc 0x07 0x86 0x7e 0x18 0x18 0x00 0x00


Última atualização (
Warning: mktime() [function.mktime]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/Los_Angeles' for 'PDT/-7.0/DST' instead in /home/edifast0/public_html/corp/libraries/joomla/utilities/date.php on line 117

Warning: date() [function.date]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/Los_Angeles' for 'PDT/-7.0/DST' instead in /home/edifast0/public_html/corp/libraries/joomla/utilities/date.php on line 243

Warning: date() [function.date]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/Los_Angeles' for 'PDT/-7.0/DST' instead in /home/edifast0/public_html/corp/libraries/joomla/utilities/date.php on line 249

Warning: strftime() [function.strftime]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/Los_Angeles' for 'PDT/-7.0/DST' instead in /home/edifast0/public_html/corp/libraries/joomla/utilities/date.php on line 250
Dom, 15 de Agosto de 2010 23:02 )
 

Warning: strftime() [function.strftime]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/Los_Angeles' for 'PDT/-7.0/DST' instead in /home/edifast0/public_html/corp/libraries/joomla/utilities/date.php on line 250
Banner

Identificação

Visitantes


Warning: date() [function.date]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/Los_Angeles' for 'PDT/-7.0/DST' instead in /home/edifast0/public_html/corp/modules/mod_vvisit_counter/helper.php on line 56

Warning: date() [function.date]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/Los_Angeles' for 'PDT/-7.0/DST' instead in /home/edifast0/public_html/corp/modules/mod_vvisit_counter/helper.php on line 57

Warning: date() [function.date]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/Los_Angeles' for 'PDT/-7.0/DST' instead in /home/edifast0/public_html/corp/modules/mod_vvisit_counter/helper.php on line 58

Warning: mktime() [function.mktime]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/Los_Angeles' for 'PDT/-7.0/DST' instead in /home/edifast0/public_html/corp/modules/mod_vvisit_counter/helper.php on line 59

Warning: mktime() [function.mktime]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/Los_Angeles' for 'PDT/-7.0/DST' instead in /home/edifast0/public_html/corp/modules/mod_vvisit_counter/helper.php on line 60

Warning: date() [function.date]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/Los_Angeles' for 'PDT/-7.0/DST' instead in /home/edifast0/public_html/corp/modules/mod_vvisit_counter/helper.php on line 63
mod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_counter
mod_vvisit_counterHoje17
mod_vvisit_counterOntem435
mod_vvisit_counterEsta semana1886
mod_vvisit_counterEste mês10982
mod_vvisit_counterTodos369997

Últimas Notícias


Warning: date() [function.date]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/Los_Angeles' for 'PDT/-7.0/DST' instead in /home/edifast0/public_html/corp/libraries/joomla/utilities/date.php on line 198

Mais Vistos


Warning: date() [function.date]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/Los_Angeles' for 'PDT/-7.0/DST' instead in /home/edifast0/public_html/corp/libraries/joomla/utilities/date.php on line 198

Itens Relacionados


Warning: date() [function.date]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/Los_Angeles' for 'PDT/-7.0/DST' instead in /home/edifast0/public_html/corp/libraries/joomla/utilities/date.php on line 198

Newsflash


Warning: date() [function.date]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/Los_Angeles' for 'PDT/-7.0/DST' instead in /home/edifast0/public_html/corp/libraries/joomla/utilities/date.php on line 198